Product Information
- Dimensions: 36x50x4mm (without XT60)
- Montage: 30.5×30.5mm, 3mm
- Weight: 7.5g (without XT60), 11g (with XT60)
Features
- 2oz copper foil support guaranteeing high current flow with 2S-6S input
- 4-layer PCB to avoid interference between power current and BEC ground wire, suitable for high power current and BEC layer
- 6 pairs of ESC power supply pads suitable for X-shaped or H-shaped rack ESC arrangement
- Dual BEC: 5V/3A BEC with synchronous corrector switch, 12V/0.5A linear BEC
- Compatible with shelves with 48mm wide top plate
- Board can withstand 4*25A current, short time 4*30A (10s)
- BEC 5V ripple: 40mV (Vin = 16V, Vout = 5V @ 2A load)
- Linear voltage regulator for 12V BEC with very low ripple, does not interfere with the display signal
- 52*36*3mm, total weight 11g including XT60
- Mounting hole pitch 30.5mm, hole diameter 3mm
- The package includes one original Amass plug, which must be soldered to the distribution board by the user
- Pay attention to the input polarity, do not invert or short-circuit the input!
- Do not touch the carbon fiber plate on the back of the distribution board, it may short circuit
- When using 4S, the regulated output can support 500mA for 12V; Voltage regulation accuracy is 2.5%
- 12V voltage regulator chip also supports 3S battery input, but output voltage = 3S real-time voltage - 1V
- BEC 12V can power 12V camera and 600mW image transmission
Reviews
There are no reviews yet.