CUAV Pixhack V5 Compatible Power Module 60V 5A XT60 Socket

Product Information:

• Product Name: Power Module
• Module Size: 32mm x 2mm
• Weight: 29g

Technical Specifications:

• Support higher input voltage: 10V-60V (3s~14s battery)
• Daha hassas akım ve voltaj algılama:
  • Voltaj algılama hassasiyeti: ±0.1V;
  • Akım algılama hassasiyeti: ±0.2A
• Higher power output current support: Maximum 5A (sensed) current: 60A

Notes: Since the maximum sensing voltage of the PIX flight control ADC is 3.3V, it supports a maximum current sensing of 60A.

Operation is very simple; connect the 6P signal cable to the POWER interface of the flight controller.

Main Functions:

• Provide 5V voltage output and maximum current of 5A to the flight controller
• Detect current and output analog signals
• Detect the current of the power system and output analog signals to the flight control unit

Ground Station Settings:

• Connect to the ground station using USB or digital connection
• Go to Settings > Optional Hardware > Battery Detector Monitor
• Select 4-Sensor 0-APM version
• Fill in the partial voltage ratio: 18-Fill voltage per ampere: 24

Manual Voltage Calibration:

Since PM modules are analog sensor devices, there may be some differences for better accuracy.

Pre-Calibration Preparation:

Measure the battery voltage using a multimeter or BB (for calibration voltage use).

Calibration Voltage Steps:

1. Connect the battery and connect to the ground station
2. Measure battery voltage using a multimeter or BB
3. Select sensor version 0, enter the measured battery voltage and measured current voltage in the box
4. Click the mouse or press TAB, the ground station will automatically calculate and save the voltage division ratio coefficient to flight control
5. Calibration complete, no calibration required for current