MT-VRX-VTX
Specifications:
2CH_US version (1258MHz and 1280MHz)
9CH_INTL version (1080MHz to 1360MHz)
RF power output: 28dBm (630mW)
6-36V DC INPUT (2-8S LiPo)
Button control and LED indicators
Integrated AGC microphone
Power consumption: <2.5W
Video format: NTSC or PAL
Audio Subcarrier: 6.5MHz and 6.0MHz
RF connector: SMA
Weight: 9g (without antenna)
Size: card 36*21.5mm
Connection Points
+ IN-: 6-36V DC input, reverse polarity protection
VID Video input
VID Video input
5V: integrated regulator output, maximum 1.5A load on this port
Aud: audio 6.5MHz input, integrated microphone is shared with this line.
TX & RX: UART for software update
Contains
1x 1.2/1.3G Video transmitter VTX-1G3-9 (INTL version) or VTX-1G3-2 (US version)
1x dipole antenna_SMA, brand frequency 1240MHz
Settings
Press and hold the button for 2 seconds to switch to frequency setting. The frequency LED flashes.
Select the frequency by pressing the button.
When the LED starts flashing at the new frequency, there is no RF output at that frequency.
If within 3 seconds there is no button movement, the new frequency and output will be active.
CMS control is not currently supported.
2CH US version is locked at 1258 and 1280 MHz, it cannot be switched to 9CH with firmware update.
Reviews
There are no reviews yet.